Bemor® BMX Rim

The best in terms of carbon rims for BMX Race.

Bemor® Carbon rims are French designed and hand-made from South Korean Tansome® H3055 Graphene fibers.

The rims have a tire grip system called "semi-hook". This geometry offers a significant increase in the resistance of the hooks in the event of impacts thanks to a greater wall thickness, without being heavier.

The sides of the rims are structured in "honeycomb" to reduce aerodynamic drag and increase resistance to critical impacts and improve the comfort of the rim, without altering the rigidity at the spoke holes and therefore the responsiveness of the wheels.

The rims have a different profile at the spoke holes. Geometry that optimizes the orientation of the carbon fiber to respond to the tensile stresses of the spokes (because carbon is an anisotropic material). In contrast, between the spokes, the profile is lower in order to reduce wind resistance, improve comfort and tolerance to wheel steering errors.

The spoke holes are only 2.3mm in diameter instead of the common 4.8mm. The reduction in diameter significantly reduces the weakness caused by these holes in the rim structure. Each spoke is retained by more material and limits the risk of tearing. However, this feature requires the use of specific nipples, only accessible from the inside of the rim.

Bemor® Carbon rims offer an incomparable weight/resistance ratio.

Please note, the rims only exist for 28 spokes.